APU FM2+ Socket:
1.AMD Athlon™ series processors
2.AMD A series processors
1.2 x DDR3 DIMM sockets supporting up to 64 GB of system memory
2.* The maximum 64 GB of system memory can be supported using 16 GB (or above) memory modules. GIGABYTE will update the memory support list on the official website when the memory modules are available on the market.
3.* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
4.Dual channel memory architecture
5.Support for DDR3 2400(OC)/2133/1866/1600/1333 MHz memory modules
6.Support for AMD Memory Profile (AMP) / Extreme Memory Profile (XMP) memory modules
Onboard Graphics Integrated Graphics Processor:
1.Maximum shared memory of 2 GB
2.1 x DVI-D port, supporting a maximum resolution of 2560x1600
3.* The DVI-D port does not support D-Sub connection by adapter.
4.* Support for 2560x1600 resolution requires both a monitor and cable that support Dual Link DVI.
5.1 x D-Sub port, supporting a maximum resolution of 1920x1200
1.Realtek® ALC887 codec
*To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
3.Support for S/PDIF Out
4.High Definition Audio
1.Realtek® GbE LAN chip (10/100/1000 Mbit)
1.1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
* To support PCI Express 3.0, you must install an FM2+ APU.
2.1 x PCI Express x1 slot
(The PCI Express x1 slot conforms to PCI Express 2.0 standard.)
3.1 x PCI slot
Multi Graphics Technology
1.Support for AMD Eyefinity technology
2.Support for AMD Dual Graphics technology
Only A series APUs support AMD Dual Graphics.
Storage Interface Chipset:
1.4 x SATA 6Gb/s connectors
2.Support for RAID 0, RAID 1, RAID 10, and JBOD
1.8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
2.2 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
1.1 x chassis intrusion header
2.1 x S/PDIF Out header
3.1 x Clear CMOS jumper
4.1 x APU fan header
5.1 x serial port header
6.2 x USB 2.0/1.1 headers
7.4 x SATA 6Gb/s connectors
8.1 x front panel audio header
9.1 x 24-pin ATX main power connector
10.1 x front panel header
11.2 x system fan headers
12.1 x 8-pin ATX 12V power connector
Back Panel Connectors
1.2 x USB 3.0/2.0 ports
2.4 x USB 2.0/1.1 ports
3.1 x RJ-45 port
4.3 x audio jacks (Line In, Line Out, Mic In)
5.1 x DVI-D port
6.1 x D-Sub port
7.1 x PS/2 keyboard/mouse port
1.iTE® I/O Controller Chip
1.APU/System fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.
2.APU/System fan speed detection
3.APU/System temperature detection
4.System voltage detection
1.PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
2.Use of licensed AMI UEFI BIOS
3.Support for DualBIOS™
4.2 x 64 Mbit flash
1.Support for @BIOS
2.Support for Xpress Install
3.Support for Q-Flash
4.Support for Smart Recovery 2
5.Support for EasyTune
* Available functions in EasyTune may differ by motherboard model.
6.Support for ON/OFF Charge
1.Norton® Internet Security (OEM version)
1.Support for Windows 8.1/7 32-bit/64-bit
2.Support for Windows XP 32-bit
* To support Windows XP 32-bit, you must install an AMD FM2+ Kaveri APU.
* It requires Service Pack 3 to support Windows XP driver installation.
Form Factor 1.Micro ATX Form Factor; 22.6cm x 17.4cm