+421 (2) 2081 2112 (Po–Pi 9:00–17:30)

MB GIGABYTE X99P-SLI (rev. 1.0)

CPU 1.Support for Intel® Core™ i7 processors in the LGA2011-3 package 2.L3 cache varies with CPU 3.Please refer "CPU Support List" for more information Chipset Intel® X99 Express Chipset ... Viac informácií
Produkt už nie je v ponuke.
Produktové číslo: GA-X99P-SLI
Výrobca: Gigabyte
Otázka k produktu
Vernostný program
pre firmy
Dodanie do druhého dňa
pri väčšine tovaru
Nakupujte s úsmevom
Predajňa v Bratislave
Osobný odber zadarmo
Odborní poradcovia
online RealshopGuru
MB GIGABYTE X99P-SLI (rev. 1.0)
MB GIGABYTE X99P-SLI (rev. 1.0)
Produkt už nie je v ponuke.


1.Support for Intel® Core™ i7 processors in the LGA2011-3 package
2.L3 cache varies with CPU
3.Please refer "CPU Support List" for more information
Intel® X99 Express Chipset
1.* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
2.4 channel memory architecture
3.Support for non-ECC memory modules
4.Support for RDIMM 1Rx8/2Rx8/1Rx4/2Rx4 memory modules (operate in non-ECC mode)
5.Support for Extreme Memory Profile (XMP) memory modules
6.8 x DDR4 DIMM sockets supporting up to 128 GB of system memory
7.Support for DDR4 2133/1866/1600/1333 MHz memory modules
(Please refer "Memory Support List" for more information.)
1.Realtek® ALC1150 codec
2.High Definition Audio
4.Support for S/PDIF Out
Intel® GbE LAN chips (10/100/1000 Mbit)
Rozširujúce sloty
1.2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
 * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.
2.2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
 * The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.
 * When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.
 (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
3.2 x PCI Express x1 slots
(The PCI Express x1 slots conform to PCI Express 2.0 standard.)
Multi Graphics Technology
1.Support for 4-Way/3-Way/2-Way AMD CrossFire™/NVIDIA® SLI™ technology
*The 4-Way NVIDIA® SLI™ configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to "1-6 Setting up AMD CrossFire™/NVIDIA® SLI™ Configuration."
Storage Interface
1.1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe x4/x2/x1 SSD support)
2.* Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.
3.Support for RAID 0, RAID 1, RAID 5, and RAID 10
4.1 x SATA Express connector
5.6 x SATA 6Gb/s connectors (SATA3 0~5)
6.4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only
 (An operating system installed on the SATA3 0~5 connectors cannot be used on the sSATA3 0~3 connectors.)
1.4 x USB 3.0/2.0 ports (available through the internal USB headers)
2.8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
Chipset + Intel® USB 3.1 Controller: 1.1 x USB Type-C™ port on the back panel, with USB 3.1 support
2.1 x USB 3.1 Type-A port (red) on the back panel
Chipset + 2 Renesas® USB 3.0 Hubs:
3 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
1.2 x USB 3.0/2.0 headers
2.1 x S/PDIF Out header
3.1 x 24-pin ATX main power connector
4.1 x 8-pin ATX 12V power connector
5.1 x PCIe power connector
6.1 x M.2 Socket 3 connector
7.1 x SATA Express connectorŠ
8.10 x SATA 6Gb/s connectors
9.1 x CPU fan header
10.1 x water cooling fan header (CPU_OPT)
11.3 x system fan headers
12.1 x front panel header
13.1 x front panel audio header
14.2 x USB 2.0/1.1 headers
15.1 x Trusted Platform Module (TPM) header
16.1 x Clear CMOS jumper
Back Panel Connectors
1.3 x USB 3.0/2.0 ports
2.1 x USB Type-C™ Port, with USB 3.1 support
3.4 x USB 2.0/1.1 ports
4.1 x optical S/PDIF Out connector
5.1 x DisplayPort
6.1 x PS/2 keyboard/mouse port
7.1 x USB 3.1 Type-A port (red)
8.1 x RJ-45 port
9.5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
I/O Controller
iTE® I/O Controller Chip
H/W Monitoring
1.CPU/CPU OPT/System fan fail warning
2.System voltage detection
3.CPU/System/Chipset temperature detection
4.CPU/CPU OPT/System fan speed detection
5.CPU/System/Chipset overheating warning
6.CPU/CPU OPT/System fan speed control
7.*Whether the fan speed control function is supported will depend on the cooler you install.
1.2 x 128 Mbit flash
2.Use of licensed AMI UEFI BIOS
3.Support for DualBIOS™
4.PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Špecifické funkcie
1.Support for APP Center
 * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
2.Support for Q-Flash
3.Support for Smart Switch
4.Support for Xpress Install
5.Ambient LED
6.Support for Cloud Station
10.Support for EZ Setup
11.Fast Boot
12.Support for On/Off Charge
13.Smart TimeLock
14.Support for Smart Recovery 2
15.System Information Viewer
16.USB Blocker
Bundle Software
1.Norton® Internet Security (OEM version)
2.Intel® Smart Response Technology
Operating System
1.Support for Windows 10/8.1 64-bit
2.Support for Windows 7 32-bit/64-bit
3.* Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.
Form Factor
ATX Form Factor; 30.5cm x 24.4cm
1.Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.
2.Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.